eWillys | Your source for Jeep and Willys deals, mods and more (2024)

It’s a project with an updated drivetrain.

“46 Willys project AMC 360 4-speed transmission Toyota front and rear diff power disc brakes Aluminum Intake MSD distributor”

https://seattle.craigslist.org/tac/cto/d/willys/6367864749.html

UPDATE: Price dropped to $1200.

(07/24/2016) Could make a good base for a modified topless wagon (already missing the top).

“1948 Willys wagon. Was going to convert it into a truck. Lots of rust. Engine runs, but needs some work to make it road worthy. $1200 obo, or trade for car.”

https://slo.craigslist.org/cto/d/1948-willys-wagon/6368392944.html

UPDATE: **SOLD** Was $3000.

Jim shared this one.

“Nice jeep all original.it was a true military jeep,will trade for cj or bronco”

I forgot to ask Gavin where he is located. Email him at: blackbike44@yahoo.com

“I have a 1957 I believe registered as a 1960 Jeep FC150. it is still a project not perfect by any means”

UPDATE: It appears this endeavor didn’t work out.

Merlin reported on aNEW CJ-5 that will go into production (approx 5,000 jeeps per year) soon. One question that many folks have asked is how the new jeep can meet the current safety specs for new cars. According to Merlin, the short answer is it can’t, but it doesn’t have to meet them. In 2014 the feds passed regulations that allowlowproduction auto manufacturers to only have to meet the specs for 1967.

“With Sema going on I am excited to finally announce the return of an old favorite, the Cj5. Universal Motors Corp (makers of the Allied Jeep L head blocks) has the new Mopar licensed Cj5 on display in booth 32326 at Sema. These sport the current Jeep engine, and there will be a diesel option as well. Bodies and parts will be manufactured by UMC, not bought from current parts and panel manufacturers other than Jeep. A kit version will be available as well. Assembly is done in Detroit. More info and pics will be posted as I receive more. http://universalmotorscorp.com/”

UPDATE: **SOLD** Was $9400.

Looks in good shape, but seller suggests it needs a little work.

“1946 Flat Fender, body off, ground-up restoration 15 years ago.
Restored to original. Everything new or rebuilt.
Everything works.
Less than 200 miles since restoration
Current reg & pink slip.
Must sell. Have receipts.
Converted to 12 volt/ Has turn signals, bucket seats, built-in battery tender.
No top; no wipers.
Needs just a little TLC.”

UPDATE: **SOLD** Was $10,000.

Has an updated engine.

“1966 CJ 6
Very clean. Garage kept. 100% rust free California Jeep. CJ6’s are roughly 20” longer than a CJ5.
-4×4 works great
-Chevy 4.3L V6 with a 4 barrel carb, headers and new quiet exhaust from the headers back. Starts right up with no issues what so ever; I daily drive it. Very fast and has great power. I also have part of a fuel injection kit.
-Smog Exempt
-New air filter and oil change 100 miles ago
-White paint and pin striping from 2009. Looks great but not perfect. Body is extremely straight with no major dents
-Drums on all 4 wheels. Stops well, no leaks.
-Factory manual steering, no power steering Continue reading →

UPDATE: Still Available.

(09/19/2017) Runs, but needs some work.

“1954 Willys Jeep M 38A1 Brush Truck
runs
need brakes and a gas tank
12 volts”

https://frederick.craigslist.org/cto/d/1954-willys-jeep-m38a1-brush/6363924697.html

Looks to be a 2A that might have some MB parts. The seller is under the impression that an MB frame is a stronger frame.

https://sfbay.craigslist.org/eby/cto/d/rare-pre-caltrans-1948-willys/6363482236.html

“Starts right up, runs and drives!
I believe it may have been a Bureau of Highways (before caltrans) vehicle, hence it’s vintage Omaha orange color and enlarged marker flashers. It’s pink slip says CJ2a, but I’ve identified that it has a rare MB (side stamped) engine Willys go devil engine and an upgraded heavier duty MB frame too. The engine and frame look stock otherwise and are indistinguishable using the same parts, if you don’t these vehicle history.
Continue reading →

This may have a replacement body. No description provided.

https://denver.craigslist.org/ctd/d/1950-willys-cj-3a/6369724609.html

Looks like a project.

“CJ2A trade for a 3/4 or 1 ton truck. I don’t have time for a project so truck must be running in its current state . Preferably a diesel. Preferably a Dodge. But will consider any 3/4 or 1 ton so let me see what you got.”

https://tulsa.craigslist.org/bar/d/willys-jeep/6357403438.html

UPDATE: **SOLD** Was $2900.

“NOT MUCH TO SAY. MY 82 YEAR OLD DAD’S OLD JEEP. HE’S HAD IT 20 YEARS? RECENTLY GONE THRU by a shop and REPLACED A BUNCH OF STUFF. RUNS AND WORKS GREAT. HE HARDLY EVER USED IT. ONE OF THOSE DEALS, HE HAD DREAMS OF JEEPING AROUND WITH HIS WIFE BUT THE WIFE DREAMS OF NOT JEEPING AROUND. CLEAN TITLE. HAS ORIGINAL 4 CYCLINDER, SWITCHED OVER TO 12 VOLT SYSTEM. GREAT MILAGE AT PUTTING AROUND SPEEDS, LIKE A GALLON AN HOUR”

That looks to be a Cab Enclosure hardtop, which means it requires the vertical windshield.

“CJ3B high hood project Buick v6 T90 3spd Dana 20 transfer case lot’s of parts hard top don’t fit but a good fabricator can make work”

https://kalispell.craigslist.org/pts/d/1953-willys-cj3b/6370010207.html

No pics provided.

“1952 Willys Stakebed with lots of extra parts. Runs good. V6 buick motor with original 4 wheel drive running gear”

https://mohave.craigslist.org/cto/d/1952-willys-stakebed/6370123640.html

Needs head gasket examined.

“For sale 1947 Jeep Willy. Bought it, it runs but after running it for awhile header gasket leaked. Have a new header gasket but never but on. It starts but would only run it for a short time. While transporting the windshield frame broke.”

https://charlestonwv.craigslist.org/cto/d/1947-jeep-willys/6361167913.html

UPDATE: **SOLD** Was $1000.

(09/13/2017) Craig shared this one. Seller is including a snow plow and front counter weight as well. Looks like a goodprice.

“1957 Jeep A Trench trencher,snow plow and front counter weight. Will sell all together or separately”

UPDATE: Price dropped to $2000.

(05/28/2017) “1958 Willy’s Jeep CJ-3B Navy Department issue. My Dad has owned this Willy’s since 1995 and used it on his property until 2010 and parked it. He never registered it and does not have a title. I does run but will need a new water pump (seized) and fuel pump. The carb. needs to be rebuilt. He has three original wheels. Engine number matches the Willy’s ID plate.”

https://inlandempire.craigslist.org/cto/d/1958-willys-jeep-cj-3b-navy/6337136396.html

UPDATE: **SOLD** Was$7000.

(09/27/2017) Powered by a 283.

“1948 CJ2A no rust perfect frame and body, 283 V8, the rest of the drive train is all original-T90 transmission, Dana 18 transfer case, front axle Dana 25 and rear axle Dana 41.

seat belts, a fire extinguisher, 12V outlet, new spare tire, Besttop Supertop, car cover, tow hook, hanging pedal kit, some extra parts like clutch linkage and u joints.

This Jeep is in great shape, no rust and always starts.
I have a roll bar that needs to be welded up that comes with it.”

More random jeep pics from Charles.

Continue reading →

UPDATE: **SOLD** Was $10,900.

Nice looking wagon refurb.

“1947 Willys Overland Wagon. 350 Chevy engine. Automatic transmission. Complete rebuild from the bottom up. Photo album of the complete rebuild.”

UPDATE: **SOLD** Was $3500.

Looks promising.

“This is an all original, unrestored Jeep with 30,923 showing on the odometer. Taken off the road and unregistered since 1974, stored in a barn and used around a farm/camp since then. The odometer stopped working after the first few years of farm use, have evidence of 28,782 miles on 8/24/1972. Engine runs great, starts right up, new tires, recent exhaust, excellent brakes, drives great, 4WD works as it should. Has the cabin heater option. Comes with the original canvas top with bows, two sets of doors, an extra set of bows for a bikini top, spare tire and original manuals. The top needs some re-sewing of the seams. Some rust in the usual places. Need some minor repairs to be roadworthy, mostly electrical.”

UPDATE: **SOLD** Was $6000.

Has a later model oil bracket, so there may have been some engine work at some point (or the original bracket broke).

“hello, i have for sale a 1948 willys model cj2a jeep,has the go-devil 4 cyl. gas engine, 3spd manual transmission, twin-stick transfer 4-wheel drive. has 79,935 miles original best that i can tell. olive green paint with white painted wheels. brake shoes,wheel cylinders and rubber brake lines,and master cylinder have been replaced. complete tune-up, 6volt system, but have a 8 volt battery in the jeep. it starts easier. seats are good shape. inside of tub is great shape. tires are weather cracked but still do the job. have sears vinyl top and new spare tire that goes with it. jeep is real good shape for its age. runs and drives good. thanks.”

Lots of updates here.

“1947 jeep wills for sale. 4.3 liter Chevy v-6 mated to an small manual transmission and the stock Dana 18 transfer case with the tera low kit and has been cryo dipped. Dana 44 front shortened 5 inches by Dutchman axles. Chrysler 9.25 rear shortened 5 inches to offset differential. Spring over in back with yj springs and tj coil springs up front. Spooled rear with locking hubs in front. 8k winch up front that’s never been used. Fuel cell and battery are in back. Copperhead fab beadlocks. Body was brand new a few years ago. Full hydraulic steering.”

https://lakeland.craigslist.org/cto/d/1947-jeep-willys-cj-2a/6364477655.html