Instant Pot Sweet Potato Chili Recipe (2024)

FAQs

How do you make chili less watery in an instant pot? ›

Mix in a scoop of cornstarch, all-purpose flour, or oats.

Rather than adding it directly to the chili (which can create clumps) make a slurry. In a small bowl, mix 1 tablespoon of cornstarch with 1 tablespoon of water, then stir this into the pot of chili.

What Is the Instant Pot Chili/Bean Setting? The bean/chili setting on the Instant Pot cooks at high pressure and can be set to "more," which is 30 minutes, or "less," which will cook for 25 minutes. You may choose the bean/chili setting and do a quick release after 15 minutes.

The good news is there are lots of easy ways to thicken up your chili with ingredients you likely already have in your pantry— flour, cornmeal, pureed beans, cornstarch, or even crushed tortilla chips will help do the job, along with some good old extra simmering time.

SOLUTION: Open the Instant Pot and make sure there's enough liquid. If too much liquid has evaporated, the Instant Pot won't pressurize, so add more liquid if necessary. Close the Instant Pot and resume pressure cooking. If you have trouble closing the lid, move the steam release handle to the VENTING position.

There are a number of reasons your Instant Pot will display its burn message. Most of these involve mishaps that may occur during the cooking process, like not adding enough liquid or forgetting to adjust the steam valve to the sealing position. Once you figure out what you've done wrong, correcting the error is easy.

Double-check your parts before you close up the pot for cooking. An improperly sealed lid can cause the Instant Pot to just cook and cook your contents as it attempts to reach pressure. This will lead to scorching and then a burn notice. Make sure that you're using enough liquid.

There are various options for the type of container, but it needs to be a minimum of 20 inches in diameter and 15 inches deep and have holes in the bottom for drainage. A 10-gallon container is good for holding one plant, while two or three sweet potato plants can be planted in a 20-gallon container.

Generally, diced sweet potatoes take 7 to 12 minutes; cubed sweet potatoes take 12 to 15 minutes; and whole potatoes take anywhere between 20 to 50 minutes, depending on size. You'll know the potatoes are done when they reach a fork-tender consistency, or when the flesh easily yields to the tip of a sharp knife.

The longer and slower you cook a sweet potato, the more maltose is formed and the sweeter it will taste.

How to fix chili that is too watery? ›

If your chili is too watery, there are a few steps you can take to thicken it: Simmer Longer: Continue cooking the chili uncovered over low heat to allow excess liquid to evaporate. Add Thickeners: Mix a small amount of cornstarch or flour with cold water and add it to the chili. Cook while stirring until it thickens.

When a recipe turns out a little too saucy, you can ladle out some of the liquid, or cook it off using the “Sauté” or “Slow Cook” function. Then, the next time you make the recipe in an Instant Pot, reduce the liquid by ½ to 1 cup. This one's easy: Just add a little water or broth to adjust the consistency.

Since liquid doesn't evaporate as much in an Instant Pot®, you may need to thicken with a mixture of cornstarch or flour and broth or stock. Before serving, remove the lid and any large pieces of meat or vegetables and bring the liquid to a boil on the Sauté setting.

Using too much liquid.

Follow this tip: While at least 1/2 to 1 cup of liquid is essential to well-cooked food in the pressure cooker, too much liquid will pull the flavor out of foods. Unless otherwise specified in the recipe, use just enough liquid to bring the cooker to pressure.